Could be interested in complete washer bottle with pumps and sensor, bumper pipe work and headlight washer jets (complete system really). Also possible interested in engine bay wiring loom depend on cost in my attempt to retrofit front parking sensors.
Cheers
Nick
4th Aug 2016 7:42 am
DaveDisco3
Member Since: 29 Apr 2014
Location: Gretton, Northamptonshire.
Posts: 597
Amp under the drivers seat, assuming it's the same as my HSE one?D3 Tonga HSE 2005
Sport body kit
Beanie grille
LED interior lights
LED side lights
De-tango
IID Bluetooth
Icarsoft i930
Clock on dash
Three flash indicators
4th Aug 2016 9:26 am
plocker
Member Since: 14 Mar 2016
Location: Preston
Posts: 828
Dibbs on rear near side door mechanism05 V8 HSE Bonatti Grey
4th Aug 2016 9:40 am
Lefrog
Member Since: 03 Aug 2012
Location: castel
Posts: 116
Dibs on rear auxiliary audio input, and passenger side cup holder (if it has one) .
Also the air suspension compressor !
4th Aug 2016 10:20 am
James3LDR
Member Since: 28 Jun 2016
Location: Bath
Posts: 30
Can I get a price for the drivers side rear light cluster? or both sides if you are not willing to split them
Thanks
4th Aug 2016 10:56 am
Nick Ground
Member Since: 14 Dec 2013
Location: West Moors
Posts: 40
I'll bet no one else has dibs on this one - the vertical matt finisher trim to fitted to the drivers door - probably described as the forward B-pillar trim!
They are fitted at factory with double sided tape and a screw, not a spare part and mine fell off whilst in the care of the wife.
NickD3 '55 SE
L405 FFRR 2014 SC
MX5
4th Aug 2016 12:35 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72788
A pillar trim, driver's side please, to replace mine with RAI holes.
4th Aug 2016 12:45 pm
BrianT
Member Since: 17 Nov 2009
Location: Ayrshire
Posts: 2069
Ok, here goes:-
Dibs on
1/ passenger and drivers mirrors
2/seat memory module
3/ OSF parking sensor
4/ drivers door actuator
5/tow electrics pending investigation of mine (if they are fitted)
6/tow electrics cover.
Think that will do for the moment
BrianT MY 16 Landmark Santorini Black
MY 05 SE Adriatic Blue (Gone but not forgotten)
4th Aug 2016 8:45 pm
Redgull
Member Since: 30 Aug 2013
Location: East Sussex
Posts: 1127
dibbs on the engine cover if the foam is good
4th Aug 2016 8:46 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20732
LandyIRL wrote:
dibs on Bumper with fog lamps ?
centre console lid if cream too please
Passenger fog light is OK, drivers side is rather crusty. I may have a good pass side one on the shelf though
No idea if PDC sensors work as yet
Bumper is also in need of repainting...My D3 Build Thread
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
