Member Since: 27 Aug 2012
Location: Orkney Islands
Posts: 597
Is the bonnet available?Dave Neil
2018 Outlander PHEV
2005 Discovery 3 TDV6 S (went up in flames)
1972 Series 3 109 200tdi (@alfredthe109)
1972 MGB GT (in bits)
12th Aug 2016 9:22 am
nickprice
Member Since: 01 Mar 2011
Location: Den Haag
Posts: 316
Would be interested in RH interior a-pillar trim if it's almond/beige (I think they all are?) and available. RH is 4x the price on eBay for some reason?
Shipping to UK.
NickD3 SE with Hankook MT 275/65/R18, IID BT Tool, ProSpeed rock/tree sliders + compressor guard, RLD sump guard & winch tray + 13,000lb hidden winch, Gearbox guard, Frontrunner 80l aux tank with fuel gauge, V8 brake upgrade, Traxide USI-160 dual battery system, Frontrunner ladder, custom boot storage, Lazer LED driving lights, de-cat exhaust, Aftermarket Oro TPMS, i7 Mac Mini touch screen install (running Windows 10) mirrored on rear screens.
12th Aug 2016 10:00 am
orkneydave
Member Since: 27 Aug 2012
Location: Orkney Islands
Posts: 597
Oh, and the EPB module!Dave Neil
2018 Outlander PHEV
2005 Discovery 3 TDV6 S (went up in flames)
1972 Series 3 109 200tdi (@alfredthe109)
1972 MGB GT (in bits)
12th Aug 2016 10:29 am
MindlessRockMonkey
Member Since: 11 Nov 2015
Location: WV6 7PF
Posts: 11
How much for the rear bulb holders and loom? Part number YND500070G
13th Aug 2016 5:17 pm
Irwin
Member Since: 04 Aug 2015
Location: Internet
Posts: 270
If it had power fold mirrors, can I have the relay and brown relay plug with wires attached to the plug.
If it has black floor carpet, looking for the section under the 2nd row as well.
Last edited by Irwin on 20th Aug 2016 8:25 pm. Edited 1 time in total
14th Aug 2016 3:54 am
VOD80
Member Since: 26 May 2010
Location: Toulouse
Posts: 105
Not sure if you would do this but I need the wiring loom from the under seat amplifier to the rear of the car... Is this possible?
17th Aug 2016 9:47 am
VOD80
Member Since: 26 May 2010
Location: Toulouse
Posts: 105
I also need the RHS battery box (top and bottom) and the LHS battery clamp and bolts... if you have them!
20th Aug 2016 8:19 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20732
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72788
You could store all that scrap metal in it waiting on the price to rise. Or tow it to the scrappy when it gets full.
24th Aug 2016 10:37 am
rovlecky
Member Since: 07 Aug 2012
Location: Aberdeenshire
Posts: 131
Did the fog lights go Mike? if not then i'll take drivers side.
Black exterior trim panel that sits in front of the intercooler
Driver side Mirror black trim the part that connect to the door
thanks Why does every page of the manual have fingerprints?
24th Aug 2016 7:39 pm
rovlecky
Member Since: 07 Aug 2012
Location: Aberdeenshire
Posts: 131
Did the fog lights go Mike? if not then i'll take drivers side.
Black exterior trim panel that sits in front of the intercooler
Driver side Mirror black trim the part that connect to the door
thanks Why does every page of the manual have fingerprints?
24th Aug 2016 7:40 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20732
MindlessRockMonkey wrote:
How much for the rear bulb holders and loom? Part number YND500070G
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20732
rovlecky wrote:
Did the fog lights go Mike? if not then i'll take drivers side.
Black exterior trim panel that sits in front of the intercooler
Driver side Mirror black trim the part that connect to the door
thanks
Fog lights are provisionally sold
Not entirely sure what trim panel you need
The mirror trim in the inside attached to the door card, or outside attached to the mirror?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
