Member Since: 07 Feb 2015
Location: Rotterdam
Posts: 72
Acquired 2 height sensors and an air conditioning condenser.... Boring but necessary2015 Discovery 4 SDV6 HSE - Montalicino Red
2006 Defender 110 TD5 - Santorini Black
1991 Porsche 911 - Guards Red
12th May 2016 6:59 pm
Paddington
Member Since: 30 May 2013
Location: Southampton
Posts: 280
This weekend - Fitted set of flood lights to the pro speed rack. Damn they are bright!! 8)
17th May 2016 3:25 pm
sweetpea54321
Member Since: 23 Nov 2015
Location: Bolton
Posts: 212
Air Con service and regas
oh and the EPB screamed at me again.... adjustment required
SP Mods so far:
New wheel winch
Instrument upgrade (clock on dash)
D4 fascia + Garmin nuvi
LED side light, interior etc
New FL2 rear wheel arch seals
Parrot MKi9200 hands free kit
17th May 2016 5:09 pm
Landy_andy
Member Since: 05 May 2013
Location: Hertfordshire
Posts: 676
Had this fitted today as it had been advised on mot.
I also had a new anti-roll bar link fitted on same side. Both had to be cut off (bolts that is) as they were probably on the car from new. Total cost £258 inc vat
19th May 2016 5:21 pm
audiobull
Member Since: 23 Apr 2016
Location: UK
Posts: 384
deleted
Last edited by audiobull on 3rd Jun 2016 7:17 pm. Edited 1 time in total
19th May 2016 6:31 pm
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
Aerialmark wrote:
Had this fitted today as it had been advised on mot.
I also had a new anti-roll bar link fitted on same side. Both had to be cut off (bolts that is) as they were probably on the car from new. Total cost £258 inc vat
Did you go for just the one side Mark?
19th May 2016 9:00 pm
Bobbybulls
Member Since: 24 Apr 2014
Location: Essex
Posts: 63
New front pair of boots yesterday, so thought a wash and brush up was in order.
Always think that it's not looking too bad for an 11 year old motor!
Last edited by Bobbybulls on 22nd May 2016 3:40 pm. Edited 1 time in total
Had this fitted today as it had been advised on mot.
I also had a new anti-roll bar link fitted on same side. Both had to be cut off (bolts that is) as they were probably on the car from new. Total cost £258 inc vat
Did you go for just the one side Mark?
Hi Stephen yes as the other was fine. The LR indie said its not a problem just do the other as and when needed. He used a genuine LR one because he said then it will not need 4 wheel alignment as with an after market one.
22nd May 2016 2:43 pm
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
He must be really good to ensure the alignment by eye
He did mark things. I trust him Stephen and all seems ok. He did say that if he used a aftermarket one I would need it aligning. I will see how it goes. I may get it aligned anyway. It's just finding somewhere near me. Another thing he mentioned was my juddering at junctions. He has had another 05 disco with the same problem and he has found a fault with the high pressure pump. If he cures that one I may be tempted to have mine done.
22nd May 2016 3:44 pm
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
Anyway Mark, how are you? The cars looking well with the detango and powder coating
How's the MG going?
With my mum having a stroke I have had no time for the MG. I am hoping to get it all back together over the next couple of weeks. The lights have been re-chromed and are just waiting to be fitted. I will then get it moted as it runs out on Wednesday. Plenty to keep me busy Stephen.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum