There's a useful picture of the parts. A couple of extras I found I needed were gear selector cable from RRS ( original was too short for new lever position) and hazard switch panel ( slightly different to D3 )
Apart from that everything was pretty straight forward - I think the most fiddly bit was re routing the wiring loom to the correct position. I had it in and out a few times until it was long enough to reach.
The parts need to be from a pre facelift RRS, I think that is 2005 - 2010, everything I have done to mine was straight swap with no cutting of either trim or wiring.
Lastly - If anyone intends to do this, Please do your homework first. This is just a short observation of my experience of the job, and not necessary the correct way of doing it. I can't be responsible if it doesn't work or goes wrong.
Yeah i had a look at that link so it must be an L320 RRS
Appreciate the info, i did wonder how you would be able to shift the selector that much without extending the cable
now just need to start stock piling parts haha
12th Sep 2021 1:48 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10372
Yeah. Parts from 2005 RRS
Note at some point they changes from silver/grey to black 4x4 switch pack.
I’m surprised neither of you went for the RRs round gear selector.
Though it does say Range Rover on it
12th Sep 2021 6:31 pm
Stu_rs
Member Since: 24 Nov 2012
Location: Essex
Posts: 74
This is a brilliant mod - well done! More pictures would be great 👍🏻2006 D3 Zambezi silver, TDV6 Auto
2007 D3 Java Black, TDV6 Auto
2007 D3 Bonatti Grey, TDV6 Auto
13th Sep 2021 4:01 pm
will.i.am
Member Since: 05 May 2016
Location: hertfordshire
Posts: 250
shame they didn't do a manual RRS - would love to do this....
14th Sep 2021 7:51 am
DISCO3HSE2018
Member Since: 28 Feb 2018
Location: Hampton
Posts: 585
What is the part number/name of the part the the radio and climate slot in to?
I've managed to find everything else on eBay but can't find the radio cage/bracket for the life of me!
18th Sep 2021 8:50 pm
D1SCD
Member Since: 13 Feb 2013
Location: North Yorkshire
Posts: 407
Sorry, should have made note of part number but didn't
What I did was get in touch with sellers on eBay that were advertising as 'Breaking L320' as they don't seem to list this part. I suppose there isn't much call for them.
Actually had to take it apart again today when my glove box arrived, as one of the mounting bolts was behind the console support frame
I must try harder to do things in the correct order first time round..
18th Sep 2021 9:14 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10372
That bolt is an absolute pain !!!
18th Sep 2021 9:31 pm
DISCO3HSE2018
Member Since: 28 Feb 2018
Location: Hampton
Posts: 585
Thats crappy luck on that bolt!
Great suggestion on messaging breakers. Will try that today
19th Sep 2021 8:53 am
D1SCD
Member Since: 13 Feb 2013
Location: North Yorkshire
Posts: 407
Finally done.. Really pleased how it's turned out
19th Sep 2021 1:17 pm
DISCO3HSE2018
Member Since: 28 Feb 2018
Location: Hampton
Posts: 585
That looks brilliant. I have a full eBay basket apart from one part - not sure what it is! I have circled it in this pic
21st Sep 2021 3:17 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10372
at a guess, its what you mount the gear selector on ???
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum