Member Since: 09 Dec 2009
Location: Hertfordshire
Posts: 95
Mine was booked in at my local dealer today to have the ride height "recall" fixed and after an hour or so my wife was told they didnt have the software to check it out.
Wasnt a completely wasted journey though as the dealer replaced the lumber wheel on the seat under warranty and also read & cleared a fault that had popped up a couple of times saying "transmission failure" so hopefully thats sorted now. Oh, and re-aligned the lower glove box to stop it rattling over bumps.
ATB, Jon.
26th Jan 2010 7:11 pm
heine
Member Since: 07 Feb 2007
Location: Midrand
Posts: 4054
Dropped TSB off at my dealer yesterday . First time they have seen it
27th Jan 2010 1:02 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
Apparently it's taking a lot lot longer than the 1 hour there quoting.
Took mine in last Friday for it's one hour recall to be told the last one they did took 4 1/2 hours just to calibrate them . Some issue with LR software
it's back in today .. All day .. So will see how they get onG4 Gone ...but not forgotten
27th Jan 2010 1:45 pm
MAW
Member Since: 23 May 2008
Location: Lincolnshire
Posts: 7
2DISCO3ORNOT wrote:
Hijack, What actually happens when one sensor goes, does it ride low or normal? Or just refuse to budge from its last setting?
I am also on the recall for this one and interested.
My RRS lost its NSR sensor about 10 days ago - the link above tells the story, magic carpet to dragster
27th Jan 2010 3:51 pm
DaveVX
Member Since: 15 Oct 2008
Location: Hampshire
Posts: 867
dropped of at 8:30am and collected at 11:30am today. all done
1st Feb 2010 6:48 pm
SN
Member Since: 03 Jan 2006
Location: Romiley
Posts: 13710
just seen this - woohoo - mines gonna get its first clean for a while
mine's in the first 1,000 or so AND (touch wood) has not had any issues (there's the kiss of death )Steve N | 21MY Defender | 08MY Discovery 3 (history) | 06MY Discovery 3 (ancient history)
1st Feb 2010 7:13 pm
DG Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50934
mine goes in this Thursday ..for this and a new rear diff 21 year LR veteran > D2 GS 2003 > D3 S 2006 > D3 HSE 2009 > D4 HSE 2013 > D4 HSE 2015 > D5 HSE 2018 > DS HSE R-Dynamic P300e 2021
Apparently it's taking a lot lot longer than the 1 hour there quoting.
Took mine in last Friday for it's one hour recall to be told the last one they did took 4 1/2 hours just to calibrate them . Some issue with LR software
it's back in today .. All day .. So will see how they get on
Mine went in today for other stuff so they decided to do this at the same time. Sounds as though they had the same issues. They could not update the software and it kept crashing.
Interestingly I've had all 4 replaced within the last 7 weeks. As I posted in December, 3 were done by LRA at Winchester Services and the remaining one at Stratstones Edinburgh a few days before Christmas. Are LR replacing like with like or is it likely the 4 that were replaced were also out of spec?
mention the Service action number and that yours is outside the vin range but you have had faults with yours
when i get a moment i'll check GTR to make sure the have not amended the action to include any other ranges TLO has left the building.......
I no longer work for a Landrover Dealer
My little chilli sauce business http://www.thechillees.co.uk
if you would like to order anything just give me a shout
Mine was done on Saturday with minimum drama from Jason and the chaps at Yeovil. Top marks as always gents I know it's not considered "kind" to say no these days, but no. Just no, ok? And if it's not ok, still no.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
| 08MY Discovery 3 (history) 
