Member Since: 04 Aug 2005
Location: Newbury
Posts: 6861
best route through the bulkhead on a manual?
so as the title says, anyone have any methods for getting cables through the bulkhead an a manual? most of the posts I've seen are on autos where the most mentioned grommet is not used but it appears to be on mine as part of the clutch/braking system? any ideas on getting a permanent feed through on the driver's side?and theeeeennn......???
16th Jan 2009 11:29 pm
GLYNNE
Member Since: 06 Oct 2006
Location: KENT
Posts: 4645
There is a gromit with wiring coming through it already in the spare battery box. Bit awkward to get to but is possible as even I managed it
16th Jan 2009 11:39 pm
blue meanie D3 Decade
Member Since: 04 Aug 2005
Location: Newbury
Posts: 6861
thanks Glynne, that's where I've stuck mine through too but I'd quite like to get a larger one through as well, I was under the impression ther was a different unused one too ?and theeeeennn......???
17th Jan 2009 12:04 am
GLYNNE
Member Since: 06 Oct 2006
Location: KENT
Posts: 4645
Sure the grommet will stretch to accommodate
17th Jan 2009 12:07 am
caverD3
Member Since: 03 Jul 2006
Location: Oberon, NSW
Posts: 6922
snip the grommet and cut out the middle.“There are only three sports: bullfighting, motor racing, and mountaineering; all the rest are merely gamesâ€
Ernest Hemmingway
D4 3.0 Active Diff, Adaptive Lights, High Beam Assist, Surround Cameras, Privacy Glass.
D3 2.7:Adaptive Headlights,Electronic Rear Diff,ARB Bar,Blaupunkt Speakers,JVC Powered Subwoofer,Removable Snorkel,Mitch Hitch,Pioneer After Market Head Unit,Steering Wheel Control Adaptor,Remote Adjustable Supension Rod System, Taxside Dual Battery System.
17th Jan 2009 12:46 am
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
There is a gromet right at the bottom left corner of the battery tray ( standing looking in the bonnet )
There was nothing in mine and it will take about 15mm of cable .Slice the grommet with a sharpe blade in the shape of a star ..helps to get more cable through.
I got big fat twin cable for 80 amp dual battery system in there and a couple of small wires for future use
I found it easier to bring the cable through the inside as its near on impossible to get your hand down behind all the abs pipes .
Inside hole is about 20mm to the right of the accelerator pedal mounting (20mm from bottom right corner )G4 Gone ...but not forgotten
17th Jan 2009 2:20 am
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
Proberly better to see what i mean ..
I have shone a light through so you can see were the hole is located
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
G4 Gone ...but not forgotten
17th Jan 2009 2:30 am
blue meanie D3 Decade
Member Since: 04 Aug 2005
Location: Newbury
Posts: 6861
thanks for that Adrian I'll give that one a tryand theeeeennn......???
17th Jan 2009 1:43 pm
TallPaul
Member Since: 03 Jan 2008
Location: Near Reading
Posts: 1214
I filled the hole above with the wires to my split charge controller and a feed to the aux sockets I put in the centre console.
Does anyone know if there is another grommit free in the bulkhead? I want to run a high current feed to the luggage area, or out to a anderson in the tow socket area.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum