bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
  
|
Yes i have a few left in the last batch i orderd.
Pete
|
 14th Jun 2009 7:13 pm |
|
|
bigdave g4
Member Since: 10 Apr 2009
Location: Flitwick
Posts: 273
|
I will take one please pete @ billing if thats o.k, thanks dave.
|
| 15th Jun 2009 9:21 pm |
|
|
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
|
No problem.
Pete
|
| 15th Jun 2009 9:28 pm |
|
|
bigdave g4
Member Since: 10 Apr 2009
Location: Flitwick
Posts: 273
|
Thanks Pete, look forward to seeing you there.
|
| 15th Jun 2009 9:30 pm |
|
|
julius
Member Since: 04 Jul 2009
Location: Beds
Posts: 5
 
|
bellautos wrote:Yes i have a few left in the last batch i orderd.
Pete
Hi Pete,
Do you still have any £499 units left? 
Thanks
|
| 6th Jul 2009 10:12 pm |
|
|
highbayrack
Member Since: 09 Jul 2008
Location: Northamptonshire
Posts: 2776
|
Hi BigD,
Decided not to sell the beast then, good man, just drive slowly past my house on your way back from Billing  might see you there
Chris On a mission to find the perfect Pork Pie. Just Found it (I think)..(Yes I have)
Official product sponsor for "Bloodhound SSC" 1000+ mph world land speed record
|
| 6th Jul 2009 10:29 pm |
|
|
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
|
There is a new software and firmware update available for my BAS interfaces, you dont need to have is if your BAS remap interface is already up and running but if we need to make changes or map update in the future you will have to use this new version software instead.
Most of you will have version 3.47 some 3.66 the new version is 3.72, it can be downloaded from the link in my signature.
Pete
PS The units are still on sale at the original offer price and are in stock pre programed with the new firmware.
|
| 11th Jan 2010 9:24 pm |
|
|
littlestevie
Member Since: 05 Dec 2009
Location: Teesside
Posts: 9
|
Hi Pete fairly new to the forum and the D3 , is this offer still available ? had a remap on my old disco 2 by gary @ td5 but this looks a much better product. Can't PM at min due to limited posts.
thanks in advance
Stevie
|
| 13th Jan 2010 9:05 pm |
|
|
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
|
Hi
Welcome to the forum, yes they are available try send me a email from my contact us page of my site.
www.bellautoservices.co.uk make sure you fill in all your details or it will go to my junk box.
When you have filled it in ill reply to you, if you post on here when sent ill know to look at my mail.
Pete
|
| 13th Jan 2010 9:09 pm |
|
|
littlestevie
Member Since: 05 Dec 2009
Location: Teesside
Posts: 9
|
Hi Pete have emailed you via your website contact page.
Cheers
Stevie
|
| 14th Jan 2010 11:53 am |
|
|
willyj
Member Since: 19 Oct 2009
Location: In the not so wild west wales
Posts: 99
|
Hi pete
Wondering whether you have the offer on the remap still going? Very interested, and how do i go about getting one?
Cheers
Wil where theres a wil theres a way!
Series 3
V8 110 CSW
300tdi 110 csw
TD5 DCPU
|
| 14th Jan 2010 12:14 pm |
|
|
kaiser
Member Since: 26 Apr 2008
Location: Fleet
Posts: 76
|
Pete,
I had an interesting little scenario the other day....
I religeously carry the BAS Remap device in my car, in case there is a breakdown and the D3 has to be returned to LR for some work, I can then up load the standard map.
However, my wife had an issue with a flat battery, which turned out to be a faulty alternator that went on fire when the AA (on behalf of LRA) turned up to jump start/re-charge the battery! This meant there was no power to the vehicle at any time for the Missus to up load the standard map. The car went to LR, was fixed and no updates were flashed, so my BAS map is still in place (luckily) - well it drives like it is anyway!
So, my question is, if this sort of exceptional circumstance occurs and LR update with a flash rendering the BAS Remap unusable, what is one supposed to do? 
Your advice gratefully received mate.
Kaiser 2006MY Buck Blue HSE with Alpaca & Wood
Steel side tubes/steps
Black & Silver LR badge upgrade
Chrome bits on front/side/back!
B A S INTERFACE - Torquey 'tastic
Also a funky Red 2005 Mini Cooper S with Union Jack Roof (My Wife's - Honest!)
|
| 18th Jan 2010 12:00 pm |
|
|
AWD man
Member Since: 03 Jul 2009
Location: In Drag
Posts: 831
|
Kaiser,
Your BAS map (and a copy of your standard map) are always stored on the interface... Whatever LR do to your car, you will always be able to re-load either map by plugging it back in.
L/R only re-flash updates etc, the actual "map" remains the same (same as the standard map on the interface), so you're only re-overwriting the fuel map with Pete's, not the full ecu brain, updates an everything... anyway, that's how I understand it.
Hope that clarifies 57 RRS TDV8
BAS Map
D3: Gone but not forgotten
|
| 19th Jan 2010 10:58 am |
|
|
catweasel
Member Since: 05 May 2006
Location: Bundaleer
Posts: 4805
|
AWD man wrote:Kaiser,
Whatever LR do to your car, you will always be able to re-load either map by plugging it back in.
Hmmmm perhaps not quite correct.
bellautos wrote:
if your dealer reflashes your car to a newer version of mapping to repair a LR error or enhance a particular thing in the engine for some reason, then yes the tool is upgradable to this new maping ONLY IF you return the car to standard before the dealer updates it.
If the car is left in a performance state then the tool is locked to what would be the old software and this will cause problems.
bellautos wrote:IMPORTANT NOTE this is ONLY possible if you return the car back to standard before a dealer visit. If the dealer reflash your car with a update and you have not returned the car to standard the BAS interface tool can not be erased and reused.
but this may answer your question. best if Pete can confirm how much of a possibility it would be kaiser
bellautos wrote:The tool is locked to a "target engine ecu" when the tool knows your car is in tuned state, its locked to the target ecus data content.
If the target ecus data content is changed then the target no longer exists, so the tool now cant login and be used.
IF the dealer does overwrite your car and for some reason and you didnt return the car to standard there is a possibility i can unlock the tool again, BUT i would need the car and the tool in my workshop to do this.
|
| 19th Jan 2010 11:51 am |
|
|
kaiser
Member Since: 26 Apr 2008
Location: Fleet
Posts: 76
|
I hear what you are both saying guys - thanks for the replies.
What I really need though, is a reply from Pete about how one should handle that exact situation - no power at all and therefore no way of uploading the standard map prior to the vehicle going to LR for work.....
Pete - you out there? 
Kaiser 2006MY Buck Blue HSE with Alpaca & Wood
Steel side tubes/steps
Black & Silver LR badge upgrade
Chrome bits on front/side/back!
B A S INTERFACE - Torquey 'tastic
Also a funky Red 2005 Mini Cooper S with Union Jack Roof (My Wife's - Honest!)
|
| 20th Jan 2010 12:16 pm |
|
|
