Had time to do mine today I just tapped in to the side lights and used a bolt to the chassis as an earth you can see in the pictures. All wire connections were all sealed with heat shrink or self amalgamated tape.
The side light feed wire is the top row middle connector in the big connector to the head light unit.
I just drilled a small hole in the top of the light unit for the wires to come through then sealed it all up with hot glue..job done... looks good .
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
Flack
12th Feb 2011 2:39 pm
MacLeod 313
Member Since: 18 Apr 2008
Location: away
Posts: 10723
Perfect Perfect..................But as a dunse I am....................you covered the wire in the sidelights I need to tap into , I don't own a multimetre to check live or not
Looks Brilliant fitted, and indeed looks a OEM fitment. Mine still have'nt arrived as yet, but have a Glue Gun at the ready
VERY IMPRESSED
12th Feb 2011 2:57 pm
StephenO
Member Since: 15 Feb 2010
Location: Scotland
Posts: 1651
I've ordered these as well.
Does anyone know if there's any issues with condensation and if it'll affect the LED's, I'm also quite prone to going through rivers etc?
Any comments appreciated
2016 RR Sport Autobiography
2005 D3 Zambezi Silver
1995 Defender 90 300Tdi Coniston Green
1968 Series 2a SWB Bronze Green
12th Feb 2011 3:27 pm
Ceekay
Member Since: 17 May 2009
Location: Bury
Posts: 2057
Prob a stupid question guys but i take that when you do actually have the fog lights on for any period of time that the heat from the fogs doesnt melt the glue
Cheers CeekayD4 HSE Lux MY16 Club Waitomo
D3 HSE MY06 missing her still…
Prob a stupid question guys but i take that when you do actually have the fog lights on for any period of time that the heat from the fogs doesnt melt the glue
Cheers Ceekay
No bud they don't get that hot..
MacLeod 313
The passenger side wire is red with a black stripe through it and the drivers side was orange and red as far as I can remember.. but the wires are in the same position in the plugs so just do the passenger side one then connect the drivers side to the same pin.
If you connect the earth up then try the red wire from the light on the top row of pins in the main head light connector you will see the LED light up so no need for tester.
Just make sure you dry and clean the glass on the inside of the fog lamp before you put the led in. I forgot on one and it looked dirty when I switched them on so had to remove and clean it ...
Flack
12th Feb 2011 6:01 pm
MacLeod 313
Member Since: 18 Apr 2008
Location: away
Posts: 10723
Thank you, will follow once mine arrive.
12th Feb 2011 6:05 pm
uncle fester
Member Since: 19 Jan 2011
Location: lancashire
Posts: 22
me thinks they look fantastic .just ordered mine and cant wait to fit them. they look a lot more expensive than £8.99 in fact they look like a million dollars
12th Feb 2011 8:53 pm
GSLRO
Member Since: 10 Sep 2008
Location: Sunderland
Posts: 1279
Ordered a set this evening ... cheers to all who have contributed to this thread.
Don't suppose anyone is up to doing a 'how to' for the modification section on the forum wiki
Or making this a sticky for a while ... mods ... pleeeease! Club N.E.R.D.s
12th Feb 2011 9:10 pm
MacLeod 313
Member Since: 18 Apr 2008
Location: away
Posts: 10723
uncle fester wrote:
me thinks they look fantastic .just ordered mine and cant wait to fit them. they look a lot more expensive than £8.99 in fact they look like a million dollars
They were only £4.50 when the thread started , but do agree they look fab.
12th Feb 2011 10:26 pm
crews control
Member Since: 18 Mar 2007
Location: Dorset
Posts: 5011
Ooops... I seem to have logged on to 'Max Power' by mistake?
[Log off]2005 D3 HSE 2011 D4 Landmark 2016 D4 HSE Lux
2017 Ford Tourneo VR46
Club Waitomo
13th Feb 2011 12:30 am
JDB
Member Since: 25 Mar 2010
Location: NW Hampshire
Posts: 2485
Guys I have done a quick pdf for fitting of the leds, I am not sure how to upload to the wiki part of the board so its in my gallery and a link is below.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum